CHANGELOG.md 15 KB

Changelog

[Unreleased]

  • HTTP server, JSON-RPC
  • GPS meta data

Release 20.02 (2020-02-17)

Highlights

  • Added InfluxDB output (#1192)
  • Added native Sigrok writer (#1297)
  • Changed to newmodel keys default
  • Fixed SoapySDR for 0.8 API
  • Added new minmax FSK pulse detector
  • Changed default to use new minmax detector and sample rate of 1MS/s for frequency above 800MHz
  • Changed -a and -G option to discourage usage
  • Improvements and support for many more sensors

Changed

  • Changed CurrentCost and EfergyOptical keys to have units (#1313)
  • Added command line information when new defaults are active
  • Added mic to csv output in the ert decoder
  • Added subtype to DSC (#1318)
  • Added meta to OOK output
  • Fixed json escaping (closes #1299)
  • Added ERT SCM protocol decoder
  • Added return codes for most devices
  • Changed remaining wind dir keys (see #1019)
  • Fixed optparse strtod with rounding (#1308)
  • Fixed for wmbus records parser
  • Added integrity check for Thermopro TP11 and TP12
  • Fixed conf eol comments (closes #1307)
  • Added config for unknown car key.
  • Fixed sync word for Honeywell CMI alarm systems
  • Fixed Wno-format-security for nixos gcc9 (#1306)
  • Fixed negative length in data_array (#1305)
  • Added native Sigrok writer (#1297)
  • Added checksum check for Rubicson 48659 meat thermometer
  • Change Updated Fan 11t conf (#1287)
  • Fixed failure on low sample rates (closes #1290)
  • Improved format conversions
  • Fixed radiohead-ask buffer overflow (closes #1289)
  • Changed Enable IKEA Sparsnäs by default
  • Changed cmake build to static lib
  • Changed to newmodel keys default
  • Changed model TFA-Drop-30.3233.01 to TFA-Drop
  • Added config for Fan-11T fan remote (#1284)
  • Added preliminary EcoWitt WS68 Anemometer support (#1283)
  • Added EcoWitt WH40 support (closes #1275)
  • Improved PCM RZ bit width detection
  • Fixed for #1114 DSC Security Contact WS4945 (#1188)
  • Fixed LaCrosse TX145wsdth repeat requirement
  • Added preliminary LaCrosse TX141TH-BV3 support
  • Fixed SoapySDR for 0.8 API
  • Fixed Auriol AFW2A1 missing check
  • Changed flex decode to count as successful output
  • Added Nexus compatible sensor descriptions
  • Improved LaCrosse TX29-IT support (#1279)
  • Added LaCrosse TX145wsdth support (closes #1272)
  • Changed KNX-RF output
  • Added support for Lansen wmbus door/window sensor
  • Improved PCM bit period detection
  • Fixed OS PCR800 and RGR968 displayed unit name
  • Fixed battery_level in Fineoffset-WH51
  • Fixed type of battery_mv in Fineoffset-WH51 (#1274)
  • Added reflected LFSR util
  • Added support for TFA Drop 30.3233.01 (#1255)
  • Added Auriol AFW2A1 support (#1230)
  • Added Verisure Alarm config file
  • Added wmbus mode S support and KNX RF telegram support.
  • Added support for decoding Lansen and Bmeters wmbus based temperature/hygrometers
  • Improved Honeywell 2Gig support
  • Changed -a and -G option to discourage usage
  • Added support for WS2032 weather station (#1208)
  • Added timezone offset print option (#1207)
  • Added LaCrosse TX141W support
  • Added battery level to Fineoffset WH51
  • Added Archos-TBH support (#1199)
  • Added Oregon ID_THGR810a ID_WGR800a version ids (#1258)
  • Improved OWL CM180 support (#1247)
  • Added Holman iWeather WS5029 older PWM (closes #947)
  • Added support for FineOffset/ECOWITT WH51 (#1242)
  • Added config for 21 key remote
  • Added rtlsdr_find_tuner_gain for exact gains
  • Improved fineoffset more heuristics to separate WH65B and WH24
  • Fixed missing csv fields on default disabled
  • Improved Efergy Optical decoder (#1229)
  • Added TX-button to some decoders (closes #1205)
  • Improved for TFA pool temperature sensor (#1219)
  • Added pulse analyzer support for read OOK data (#1216)
  • Fixed ook input support bug from a9de888 (#1215)
  • Fixed missing hop_time when reading file (closes #1211)
  • Fixed Acurite 899 rain_mm conversion value (#1203)
  • Fixed build files (closes #1201)
  • Added more input format validation
  • Changed FSK pulse detector mode option
  • Fixed overlong msg in Radiohead (closes #1190)
  • Added optional CSA checker to tests
  • Added InfluxDB output (#1192)
  • Fixed Hondaremote for missing first bit
  • Fixed integer promotion for uint32_t fields (#1193)
  • Fixed data format in ELV (#1187)
  • Fixed closing brace bug in test bitbuffer (#1186)
  • Fixed issue where bt_rain decoder uses -1 as index
  • Changed if the set frequency is > 800MHz then set sample rate to 1MS/s
  • Added new minmax FSK pulse detector
  • Added InfluxDB relay example script
  • Fixed radiohead buffer underflow (#1181)
  • Fixed range clamping on RSSI (#1179)
  • Fixed unaligned sample buffer length (#1177)
  • Fixed bad event return value in elantra (#1176)
  • Fixed accounting if decoder misbehaves (#1175)
  • Fixed ge_coloreffects undef behav (#1173)
  • Added protocol selection to test bitbuffer input
  • Added streaming test bitbuffers (#1062)
  • Fixed parsing oversized bitbuffer (#1171)
  • Added length check for interlogix device and update return codes (#1169)
  • Added preamble check for microchip hcs200 to reduce false positives (#1170)
  • Added unboxed types for data
  • Added warnings on alloc failure
  • Added alloc checks, fixes #1156
  • Improved Compact doubles in mqtt devices topics
  • Added Auriol-HG02832 support (#1166)
  • Improved Honeywell for 2Gig, RE208 (#747)
  • Changed Upgrade Mongoose 6.13+patches to 6.16+patches
  • Fixed expand Efergy-e2CT exp range (#1163)
  • Added RTL-SDR error code output
  • Added Hyundai Elantra 2012 TPMS support (#1158)
  • Added Norgo NGE101 support (#1042)
  • Improved Convert read OOK pulse_data to current sample rate (#1160)
  • Fixed Acurite 899 rain_mm format (#1154)
  • Added gt_tmbbq05 parity check
  • Changed GT-WT-03 added checksum (#1149)
  • Change Updated QUIGG GT-TMBBQ-05 with MIC
  • Changed GT-TMBBQ-05 added ID, finetuned pulse lengths (#1152)
  • Added Sonoff RM433 conf example (#1150)
  • Added support for Globaltronics GT-WT-03 (#1149)
  • Added support for QUIGG GT-TMBBQ-05 (#1151)
  • Improved Reorder some keys, normalize some keys (#998)
  • Improved Oregon Scientific V3 preamble match
  • Added support for Oregon Scientific WGR800X (#1045)
  • Added Integration docs
  • Added RRD example script

Release 19.08 (2019-08-29)

Highlights

  • Added MQTT output (#1016)
  • Added stats reporting (#733)
  • Added SoapySDR general keyword settings option, e.g. antenna
  • Added new model keys option
  • Changed Normalize odd general keys on devices (#1010)
  • Changed Use battery_ok instead of battery for newmodel
  • Added report model description option (#987)
  • Added pulse data text file support (#967)
  • Added color to console help output
  • Fixed CF32 loader; addeded CS8, CF32 dumper

Changed

  • Added CurrentCost EnviR support (#1115)
  • Added ESIC-EMT7170 power meter (#1132)
  • Added LaCrosse-TX141Bv3 support (#1134)
  • Added channel to inFactory-TH (#1133)
  • Added man page rtl_433.1 (#1121)
  • Added color to console help output
  • Added support for Philips AJ7010 (#1047)
  • Added frequency hopping signal support for win32 (#1128)
  • Added Holman WS5029 decoder
  • Added Acurite Rain 899 support
  • Added support for Oregon scientific THGR328N and RTGR328N (#1107) (#1109)
  • Added frequency hop on USR1 signal
  • Added '-E hop' option
  • Added option for multiple hop times
  • Added sensor similar to GT-WT-02 (#1080)
  • Added Rubicson 48659 Cooking Thermometer
  • Added TFA Dostmann 30.3196 decoder (#983)
  • Added support for HCS200 KeeLoq encoder (#1081)
  • Added channel output to lacrosse_TX141TH_Bv2 (#1097)
  • Added IKEA Sparsnäs decoder.
  • Added support for Eurochron weather station sensor (#1090)
  • Added MQTT topic format strings (#1079)
  • Added two EV1527 based sample configurations (#1087)
  • Added DirecTV RC66RX Remote Control
  • Added support for Ecowitt temperature sensor
  • Added Companion WTR001 decoder (#1055)
  • Changed Thermopro TP12 also supports TP20 (#1061)
  • Added configuration for PIR-EF4 sensor (#1049)
  • Added Alecto WS-1200 v1/v2/DCF decoders to Fineoffset (#975)
  • Added TS-FT002 decoder (#1015)
  • Added Fine Offset WH32B support (#1040)
  • Added LaCrosse-WS3600 support, change LaCrosse-WS to LaCrosse-WS2310
  • Added LaCrosse WS7000 support (#1029) (#1030)
  • Changed Omit humidity on Prologue if invalid
  • Added MQTT output (#1016)
  • Added stats reporting (#733)
  • Added Interface Specification for data output (#827)
  • Added checksum to Ambient Weather TX-8300
  • Added Interlogix glassbreak subtype
  • Added Jansite TPMS support (#1020)
  • Added Oregon Scientific RTHN129 support (#941)
  • Changed Use battery_ok instead of battery for newmodel
  • Changed Update battery_low, temperatureN keys
  • Changed Normalize odd general keys on devices (#1010)
  • Fixed Efergy-e2 current reading exponent
  • Added FS20 remote decoder (#999)
  • Added SoapySDR general keyword settings option
  • Added option to select antenna on SoapySDR devices (#968)
  • Fixed CF32 loader; added CS8, CF32 dumper
  • Added ASAN to Debug builds
  • Changed tfa_twin_plus_30.3049: Add mic to output
  • Added new model keys option
  • Enhanced Kedsum, S3318, Esperanza with MIC (#985)
  • Added support for XT300/XH300 soil moisture sensor (#946)
  • Changed Schrader unit from bar to kPa
  • Added report model description option (#987)
  • Added native scale for SDRplay
  • Added Chungear BCF-0019x2 example conf
  • Changed GT-WT-02 to support newer timings; changed model name
  • Added pulse data text file support (#967)
  • Added Digitech XC0346 support to Fine Offset WH1050 (#922)
  • Added bitbuffer NRZI(NRZS/NRZM) decodes
  • Added Rosenborg/WH5 quirk to Fineoffset
  • Added support for Silverline doorbells (#942)
  • Changed TPMS Toyota to match shorter preamble
  • Changed TPMS Citroen data readings
  • Changed TPMS Renault data readings
  • Added Digitech XC-0324 temperature sensor decoder (#849)
  • Added sample rate switching
  • Added Mongoose

Release 18.12 (2018-12-16)

Highlights

  • Added conf file support with examples in etc/rtl_433/
  • Default KV output has pretty colors on console
  • Added meta data for levels, precision time, protocol, debug, tagging
  • Added rtl_tcp input (#894)
  • Added SoapySDR support with CU8/CS16/F32 input/output conversions (#842)
  • Added VCD output, Sigrok pulseview converter

Changed

  • Install example conf files will to etc/rtl_433/
  • Default output is terse with just the most important info
  • Deprecate option q and D for new v to set verbosity
  • Default KV output has pretty colors on console
  • Added debug bits output option
  • Added protocol number meta data option
  • Added precision time and time report options (#905)
  • Deprecate option t and I for new S none|all|unknown|known
  • Changed to use pulse detect to track and grab frames
  • Added rtl_tcp input (#894)
  • Added bitrow debugging output helper
  • Added bitbuffer_debug, bitrow_print, bitrow_debug
  • Changed flex to use keys for all values (#885)
  • Allow multiple input files, positional args are input files
  • Added option for output tagging
  • Added conf examples for generic SCV2260 and PT2260
  • Added a conf file parser (#790)
  • Added negative protocol numbers to disable a device
  • Added Freq/RSSI/SNR output to data_acquired_handler (#865)
  • Added flex suggestion to analyzer output, switch to unit of us
  • Added null output option (suppress default KV)
  • Added option to skip the tests to be built. (#832)
  • Added SoapySDR support (#842)
  • Added CU8/CS16 output conversion
  • Improved dumpers to allow multiple dumpers
  • Removed rtlsdr sync mode
  • Added VCD output
  • Added Sigrok pulseview converter
  • Added f32 output modes
  • Added flex getter (#786)
  • Added version (-V) and help (-h) option (#810)
  • Added example MS Visual Studio 2015 project (#789)
  • Added CS16 input and output (#773)
  • Added preamble option to flex decoder

Added and improved devices

  • Added Gust to Hideki, report proper mph (#891)
  • Changed raincounter_raw field to rain_inch for acurite (#893)
  • Removed EC3k, converted to flex conf
  • Removed Valeo, converted to flex conf
  • Removed Steffen, converted to flex conf
  • Changed ELV-EM1000, ELV-WS2000 to structured output
  • Changed X10-RF to structured output
  • Changed Lightwave-RF to structured output
  • Added confs ported from old devices
  • Improved Fine Offset WH-3080 to support new version Watts/m value calculation
  • Added support for Bresser Weather Center 5-in-1
  • Added Biltema rain gauge protocol decoder, disabled by default
  • Added ESA 1000/2000 protocol decoder
  • Added support for Honeywell Wireless Doorbell
  • Improved inFactory with added checks, enabled by default
  • Added Maverick et73
  • Added Ambient Weather WH31E (#882)
  • Added AmbientWeather-TX8300 (TFA 30.3211.02) support
  • Added Emos TTX201 (#782)
  • Added Hideki / Cresta temperature sensor (#858)
  • Added Fine Offset WH65B support (#845)
  • Added AcuRite 3-n-1 (#720)
  • Added PMV-107J TPMS (#825)
  • Added Fine Offset WH65b support
  • Added Fine Offset WH24 (#809)
  • Added TP08 remote thermometer (#750)
  • Added WT0124 Pool Thermometer
  • Added Hyundai WS sensor (#779)
  • Added M-Bus (EN 13757-4) - Data Link layer (#768)
  • Improved RadioHead to unify the applications
  • Added Sensible Living protocol (#742)
  • Added Oregon Scientific UVR128 UV sensor (#738)
  • Added Pacific PMV-C210 TMPS support (#717)
  • Added SimpliSafe Sensor (#721)

Release 18.05 (2018-05-02)

Highlights

  • Preparations for features like MQTT and SoapySDR
  • Syslog for simple network output
  • Rewritten demodulators to support a "precise" mode using a given tolerance and optional sync symbols
  • Simplified data output layers

Changed

  • Added conversion hPA/inHG, kPa/PSI (#711)
  • Added remote syslog output
  • Added a flexible general purpose decoder (#647)
  • Added git version info to usage output if available
  • Added number suffixes on e.g. frequency, samplerate, duration, hoptime
  • Added Profile build type using GPerfTools
  • Changed grab file name to gNNN_FFFM_RRRk.cu8 (#642)
  • Added option to use receiver serial number -d :SERIAL (#648)
  • Added option to stop after outputting successful event(s)
  • Changed to new data API
  • Added option to verify simulated decoding of raw data

Added and improved devices

  • Added decoder for Dish Network UHF Remote 6.3 (#700)
  • Added interlogix devices driver (#649)
  • Added Euroster 3000TX, Elro DB270 (#683)
  • Added x10_sec device for decoding X10 Security RF signals (#671)
  • Added device LaCrosse TX141 support to lacrosse_TX141TH_Bv2.c (#670)
  • Added GE Color Effects Remote indent and MAX_PROTOCOLS
  • Added support for Telldus variants of fineoffset (#639)
  • Added support to Oregon Scientific RTGN129
  • Added device NEXA LMST-606 magnetic sensor
  • Added support for Philips outdoor temperature sensor
  • Added support for Ford car remote.
  • Added support for the Thermopro TP-12.
  • Added infactory sensor
  • Added Renault TPMS sensor
  • Added Ford TPMS sensor
  • Added Toyota TPMS sensor
  • Added GE Color Effects remote control
  • Added Generic off-brand wireless motion sensor and alarm system
  • Added Wireless Smoke and Heat Detector GS 558
  • Added Solight TE44 wireless thermometer